Troubleshooting: Why Is My Sharp Drawer Microwave Not Heating?

If your Sharp drawer microwave suddenly stops heating, don’t panic! There are several possible causes for this issue, and most of them are easy to fix. In this article, we’ll walk you through the troubleshooting process and show you how to fix it yourself. So whether you’re a handy homeowner or a frustrated renter, read on to get your microwave heating again!

Why Is My Sharp Drawer Microwave Not Heating?

My Sharp drawer microwave stopped heating my food properly.

June 29, 2017

I love my Sharp drawer microwave. It heats up my food fast, it’s easy to clean, and it’s out of sight. However, lately, it stopped heating my food properly.

So, I naturally assumed there was something wrong with the microwave. I checked the vents, cleaned the microwave, and made sure the door was closed properly. But, my food was still coming out cold.

In desperation, I did a quick google search for “my Sharp drawer microwave stopped heating”.

Turns out, it’s a common problem. In fact, there is a service bulletin for the Sharp drawer microwave for this problem. The magnetron inside the microwave has overheated and needs to be replaced.

So, I called Sharp. The customer service rep told me it would cost $250 for them to replace the magnetron.

Now, I’m not sure if it’s worth it. I mean, the microwave is only 2 years old. It’s not worth that much, right?

So, I guess I’ll have to live without my Sharp drawer microwave until I can save up the money to replace it.

How Do I Troubleshoot My Sharp Drawer Microwave If It Is Not Heating?

• 1. Check if the microwave is plugged in and receiving power.
• 2. Ensure that the microwave door is closed properly.
• 3. Check if the microwave turntable is able to rotate.
• 4. Clean the microwave’s vents and filters to ensure proper airflow.
• 5. If the microwave still does not heat, contact a professional repair service for assistance.

What Are The Common Causes Of A Sharp Drawer Microwave Not Heating?

A microwave is a convenient appliance that heats food quickly and efficiently. However, sometimes a drawer microwave may not heat food properly. There are several possible reasons for this problem.

One common problem is a dirty microwave. If the microwave is not cleaned regularly, food particles and grease can build up inside the appliance. This can cause the microwave to overheat or not heat food evenly. To clean the microwave, you can use a damp cloth to wipe down the inside and outside of the appliance. You can also use a mild detergent to remove any stubborn stains.

Another possible cause of a sharp drawer microwave not heating is a malfunctioning magnetron. The magnetron is the part of the microwave that generates the microwaves that heat the food. If the magnetron is not working properly, the microwave will not be able to heat food properly. To check if the magnetron is the problem, you can try using a multimeter to test it. If the magnetron is defective, you will need to replace it.

Finally, another possible cause of a sharp drawer microwave not heating is a broken door switch. The door switch is a safety feature that prevents microwaves from escaping when the microwave door is open. If the door switch is broken, the microwave will not be able to heat food properly. To check if the door switch is the problem, you can try using a multimeter to test it. If the door switch is broken, you will need to replace it.

By identifying and addressing these common problems, you can ensure that your drawer microwave continues to heat food properly.

How Do I Clean The Heating Element In My Sharp Drawer Microwave?

Cleaning the heating element in your Sharp drawer microwave is a simple task that can be completed in a few minutes.

1. Unplug the microwave and allow it to cool down before cleaning.

2. Remove the drawer and wash it using a mild detergent and water.

3. Use a damp cloth to wipe down the outside of the microwave.

4. To access the heating element, you will need to remove the rear panel of the microwave. To do this, simply remove the screws that hold it in place.

5. Once you have removed the panel, you will be able to see the heating element. Use a soft cloth or brush to remove any dust or debris that may be stuck to the element.

6. Reattach the rear panel and plug in the microwave.

By following these simple steps, you can keep your Sharp drawer microwave clean and in good condition for years to come.

How Can I Test The Heating Element In My Sharp Drawer Microwave?

To test the heating element in your Sharp drawer microwave, follow these steps:

1. Unplug the microwave and allow it to cool down completely.

2. Remove the drawer and locate the heating element. It will likely be located at the bottom of the drawer.

3. Inspect the heating element for any visible signs of damage, such as cracks or breaks.

4. Test the continuity of the heating element using a multimeter. Set the multimeter to the ohms setting and touch the probes to the terminals of the heating element. If the heating element is functioning properly, the multimeter should read a resistance between 20 and 50 ohms.

5. If the heating element is damaged or does not pass a continuity test, it will need to be replaced. You can usually purchase a replacement heating element from the manufacturer or an authorized repair center.

It’s important to note that before attempting any repairs on your microwave, you should always unplug it and allow it to cool down completely. Additionally, if you are not comfortable performing these tests or repairs, it is best to contact a professional for assistance.

How Do I Replace The Heating Element In My Sharp Drawer Microwave?

To replace the heating element in your Sharp drawer microwave, you will need to follow these steps:

1. Unplug the microwave and allow it to cool down.

2. Remove the screws that hold the control panel in place and disconnect the wires.

3. Pull the control panel up and out to remove it.

4. Remove the screws that hold the cabinet in place and disconnect the wires.

5. Pull the cabinet up and out to remove it.

6. Remove the screws that hold the heating element in place and disconnect the wires.

7. Pull the heating element out and disconnect the wires.

8. Connect the new heating element to the wires and screw it into place.

9. Replace the cabinet and screw it into place.

10. Replace the control panel and screw it into place.

11. Plug the microwave in and test it to make sure it is working properly.

It is important to follow all safety guidelines and instructions when working on your microwave. If you are not comfortable performing these repairs, it is best to hire a professional.

Final Thoughts

In conclusion, if your Sharp drawer microwave is not heating, it could be due to a number of reasons. Start by checking the obvious culprits, like the power source and the door switch. If those are fine, then the issue could be with the magnetron, transformer, or other components. It’s always best to call a professional appliance repair technician for assistance with these issues. Attempting to repair a microwave yourself can be dangerous, as they contain high voltage parts that can pose a shock hazard.