Centered Cabinet Pulls: Should You Follow This Trend?
What To Know
- If you have a bank of smaller cabinets, like 24″ or 30″ wide, I would recommend putting the pulls in the center of the cabinets, just for ease of use.
- So in summary, I think it’s best to have cabinet pulls off-center, closer to the corners, unless you have a bank of smaller cabinets, in which case I would recommend putting them in the center.
- Using a drill bit that is the same size as the screw holes on your new pulls, drill holes in the cabinet doors where you want the pulls to be installed.
A recent project required that I install quite a few new cabinets. In the process, I agonized over whether or not to center the cabinet pulls. I’ve seen it done both ways and wasn’t sure which was the “right” way. After consulting with other professionals and doing a little research, I came to a conclusion. Here are my findings in case you are wondering the same thing.
Should Cabinet Pulls Be Centered?
In my experience, most people tend to center their cabinet pulls. But I think it looks so much better to have them off-center. I like to have them closer to the corners. Sometimes people will even put two pulls on one cabinet, one in each corner. I think this is a great look too, as long as your cabinets are at least 30″ wide (so there’s enough room for the pulls).
If you have a bank of smaller cabinets, like 24″ or 30″ wide, I would recommend putting the pulls in the center of the cabinets, just for ease of use. It’s not worth having the pulls in the corners of a small cabinet, because you won’t really be able to get your fingers around the pulls very well. So it’s best to just center them.
Also, I would avoid putting the pulls in the center of a large cabinet. I think it’s better to have them closer to the edges. You don’t want to have to reach all the way into the center of a large cabinet to open it. So I would recommend putting the pulls closer to the sides.
So in summary, I think it’s best to have cabinet pulls off-center, closer to the corners, unless you have a bank of smaller cabinets, in which case I would recommend putting them in the center. Also, I would avoid putting the pulls in the center of a large cabinet. I hope this helps!
How Do You Measure For Cabinet Pulls?
- Choose a pull that is at least half the width of the door or drawer
- Measure the height of the cabinet door or drawer
- Choose a pull that is no more than half the height of the door or drawer
- Use a template to ensure proper placement of the pulls
What Are The Different Types Of Cabinet Pulls?
Cabinet pulls are more than just a decorative accent – they’re an important part of your kitchen’s functionality.
They can be used to open cabinets, drawers, and even pantry doors. And, with so many different types available, there’s a style to suit any taste.
From traditional to modern, and everything in between, here are some of the most popular types of cabinet pulls:
1. Standard Cabinet Pulls:
These pulls are typically made of metal and are available in a variety of finishes, including brass, chrome, and stainless steel. They’re also available in a variety of sizes, so you can choose the perfect one for your cabinets.
2. Drawer Pulls:
These pulls are similar to standard cabinet pulls, but are designed specifically for use on drawers. They’re available in a variety of styles, including traditional, modern, and everything in between.
3. Cabinet Knobs:
Cabinet knobs are small, round pulls that are typically made of metal. They’re available in a variety of finishes, including brass, chrome, and stainless steel. Cabinet knobs are often used on doors, but can also be used on drawers.
How Do You Install Cabinet Pulls?
Cabinet pulls are a great way to update the look of your kitchen or bathroom without having to do a full-scale renovation. They can also be a quick and easy way to add a personal touch to your space. Follow these simple steps to install cabinet pulls:
1. Choose your pulls. There are a variety of styles and materials to choose from, so take your time in selecting the perfect ones for your space.
2. Remove the old hardware. If you’re replacing existing cabinet pulls, you’ll need to remove the old ones before installing the new ones.
3. Drill holes for the new hardware. Using a drill bit that is the same size as the screw holes on your new pulls, drill holes in the cabinet doors where you want the pulls to be installed.
4. Install the new pulls. Insert the screws that come with your new pulls into the holes you just drilled and tighten them down using a screwdriver or drill.
Should Cabinet Pulls Match The Hardware On The Rest Of The Kitchen?
There is no right or wrong answer to this question, as the decision of whether or not to match cabinet pulls to the hardware on the rest of the kitchen is a matter of personal preference. Some people may prefer to have all of the hardware in their kitchen match, while others may prefer to have different hardware for different areas of the kitchen. Some people may also prefer to have a mix of both matching and different hardware.
If you are trying to decide whether or not to match your cabinet pulls to the hardware on the rest of your kitchen, there are a few things to consider. First, think about the overall look and feel of your kitchen. If you have a very modern kitchen, you may want to choose modern-looking hardware to match. If you have a more traditional kitchen, you may want to choose more traditional-looking hardware. Second, think about the function of the hardware.
Can You Put Cabinet Pulls On Any Type Of Cabinet?
Cabinet pulls can be put on any type of cabinet, as long as there are enough screw holes to attach the pulls. Cabinet pulls are decorative hardware that can be used to update the look of a cabinet, and they can be used on both the upper and lower cabinets. There are many different types of cabinet pulls available, so you can choose the ones that best match the style of your cabinets.
If you have a lot of cabinets, you may want to purchase a variety of cabinet pulls to give each cabinet a unique look. You can also mix and match different types of cabinet pulls to create a more eclectic look. For example, you could use glass cabinet pulls on some cabinets and metal cabinet pulls on others.
Cabinet pulls are a great way to add a personal touch to your cabinets, and they can also be used to make a statement. If you’re looking for a way to update the look of your cabinets, consider using cabinet pulls.
Final Note
So, should cabinet pulls be centered? The answer is, it depends. Some designers prefer to have the pulls centered, while others believe that the pulls should be placed in a more functional position. Ultimately, the decision of where to place the pulls is up to the individual. If you’re looking for a way to add a unique touch to your kitchen, consider placing the pulls in a non-centered position. Not only will this add a touch of personality to your kitchen, but it will also make it more functional. After all, isn’t that what kitchen design is all about?
