How To Uninstall Your Whirlpool Over Range Microwave Like A Pro!

If you’ve recently purchased a new Whirlpool over-the-range microwave and are looking to uninstall the old one, you’ve come to the right place! In this blog post, we’ll walk you through the step-by-step process of uninstalling a Whirlpool over-the-range microwave. We’ll also provide some tips and advice on how to make the process as smooth as possible. So, whether you’re an experienced DIYer or just looking to save some money, read on for everything you need to know about uninstalling a Whirlpool over-the-range microwave!

How To Uninstall Whirlpool Over Range Microwave

With a sleek look, Whirlpool over range microwaves are appealing to many homeowners. But, over time, people might need to remove their old over range microwave to make room for a new microwave or to upgrade the kitchen.

In this blog post, we’ll show you how to remove a Whirlpool over range microwave. We’ll take you through the process step by step, so you can easily uninstall your microwave and replace it.

First, gather your tools. You’ll need:

* A Phillips head screwdriver

* A flat head screwdriver

* A putty knife

* A drill

* A hammer

Next, unplug the microwave. This is to ensure safety, as the microwave’s heating element will still be hot after it’s been unplugged.

Remove the screws that hold the microwave in place. These screws are usually located on top of the microwave, near the handle.

Once you’ve removed the screws, carefully pull the microwave away from the wall. If the microwave is stuck, you can use a putty knife to pry it away from the wall.

Once the microwave is loose, disconnect the power cord from the outlet.

Next, remove the mounting brackets from the microwave. These brackets are usually located on the back of the microwave, near the vent.

Finally, remove the screws that hold the mounting brackets in place.

You can now remove the microwave from the wall.

Once you’ve removed the microwave, you can replace it or install a new one.

Remember to always follow safety guidelines when working with electricity.

What Tools Do I Need To Uninstall A Whirlpool Over-the-range Microwave?

• 1. Flathead screwdriver
• 2. Ratchet and socket set
• 3. Electrical tape
• 4. Wire cutters

How Do I Disconnect The Power Supply Before Uninstalling A Whirlpool Over-the-range Microwave?

How Do I Disconnect The Power Supply Before Uninstalling A Whirlpool Over-the-range Microwave?

Disconnecting the power supply before uninstalling a Whirlpool over-the-range microwave is an essential safety step. The microwave is connected to the power supply, and disconnecting it ensures that the microwave is not connected to any power source during the removal process. This helps prevent electric shock or other injuries.

1. Locate the power supply: The power supply is usually located behind the microwave, near the wall. It may have a cord with a plug or it may be hard-wired into the wall.

2. Disconnect the power supply: Unplug the power cord from the outlet or turn off the circuit breaker for the microwave. If the power supply is hard-wired, turn off the power to the circuit at the main electrical panel.

3. Test for power: Use a non-contact voltage tester to ensure that the microwave is no longer receiving power. Touch the tester to the microwave’s power cord and plug, as well as any exposed wiring. If the tester does not light up, the microwave is safely disconnected from the power supply.

4. Remove the microwave: Carefully remove the microwave from the cabinet. You may need to unscrew any screws or brackets that hold it in place.

5. Dispose of the microwave: Once you have safely removed the microwave, you can dispose of it according to local regulations. Some communities have special programs for recycling or disposing of large appliances.

By following these steps, you can safely disconnect the power supply before uninstalling a Whirlpool over-the-range microwave. Always exercise caution when working with electrical appliances and consult with a professional if you are unsure about how to proceed.

How Do I Uninstall A Whirlpool Over-the-range Microwave That Is Hardwired?

Uninstalling a Whirlpool over-the-range microwave that is hardwired can be a challenging task, but with the right tools and techniques, it can be done. Here are the steps to follow:

1. Disconnect the power supply: Turn off the circuit breaker that supplies power to the microwave. This will ensure there is no risk of electric shock.

2. Remove the cabinet: Remove the screws or nails that hold the cabinet in place. Carefully lift the cabinet off the wall and set it aside.

3. Disconnect the wiring: Locate the wiring connected to the microwave. Disconnect the wires by loosening the terminal screws and pulling the wires free. Take care not to touch any bare wires.

4. Remove the mounting bracket: The mounting bracket holds the microwave in place. Remove any screws or bolts that hold it in place and lift the bracket off the wall.

5. Remove the microwave: Lift the microwave off the wall and set it aside. Take care not to damage the microwave or the walls.

6. Reinstall the cabinet: Once the microwave is removed, you can reinstall the cabinet. Be sure to reattach any screws or nails that were removed.

How Do I Uninstall A Whirlpool Over-the-range Microwave That Is Plugged Into An Outlet?

Uninstalling a Whirlpool over-the-range microwave that is plugged into an outlet involves a few steps to ensure safety and avoid damaging the microwave or outlet. Here are the general steps to follow:

1. First and foremost, make sure that the microwave is turned off and disconnected from the power source. This will prevent any risk of electric shock or damage to the microwave.

2. Locate the screws that hold the microwave in place. These screws may be located behind the control panel or on the sides or top of the microwave. Remove these screws and carefully lift the microwave off the mounting bracket.

3. Once you have removed the screws, carefully pull the microwave away from the wall. Be sure to support the weight of the microwave as you pull it to avoid damaging the mounting bracket or the wall.

4. Once the microwave is out of the way, disconnect the power cord from the outlet. Use a screwdriver to disconnect the plug from the outlet, being careful not to damage the plug or outlet.

5. With the power cord disconnected, you can now remove the mounting bracket from the wall. Carefully unscrew the mounting bracket from the wall and remove it from the wall.

6. With the mounting bracket removed, you can now remove the power cord from the microwave. Use a screwdriver to disconnect the power cord from the microwave, being careful not to damage the plug or cord.

How Do I Uninstall A Whirlpool Over-the-range Microwave That Is Wall-mounted?

Uninstalling a Whirlpool over-the-range microwave that is wall-mounted requires several steps. Here are the steps to follow:

1. Turn off the power to the microwave at the circuit breaker.

2. Remove the screws or bolts that hold the microwave in place.

3. Carefully pull the microwave away from the wall.

4. Disconnect the power cord and any other wires or cables from the microwave.

5. Remove the mounting bracket from the wall.

6. Place the microwave in a safe location where it will not be damaged.

7. Clean up any debris or dust left behind.

8. Repeat the process in reverse to install the new microwave.

It is important to note that these instructions are general guidelines and may vary depending on the specific model of microwave. It is important to refer to the manufacturer’s instructions or hire a professional if you are unsure about any of the steps.

Summary

In conclusion, uninstalling a Whirlpool over range microwave may seem daunting, but with the right tools and instructions, it can be a simple and painless process. Remember to unplug the microwave, remove the screws, and carefully lower it to the ground. With a little patience and effort, you can have your microwave uninstalled and ready to use in no time.