Master the Art: Essential Tips on How to Put Bissell Vacuum Back Together

Have you ever taken your Bissell vacuum apart for cleaning or repairs, only to find yourself staring at a pile of parts with no idea how to put it back together? You’re not alone! Disassembling a vacuum can be daunting, but with the right instructions, reassembling it can be a breeze. This comprehensive guide will walk you through the process of putting your Bissell vacuum back together, step by step.

Before You Begin: Gather Your Tools and Parts

Before diving into reassembly, ensure you have all the necessary tools and parts:

• Your Bissell vacuum: This may seem obvious, but having your vacuum readily available is essential!
• Your Bissell vacuum’s manual: The manual will provide specific instructions for your model.
• Screwdrivers: You’ll likely need both Phillips and flathead screwdrivers.
• A clean, flat surface: This will help avoid losing small parts and make reassembly easier.
• A flashlight: A flashlight can be helpful for seeing into tight spaces.
• Gloves (optional): Gloves can protect your hands from dirt and grime.

Step 1: Familiarize Yourself with Your Vacuum

Before attempting to put your vacuum back together, take some time to understand its components.

• Identify the main parts: Locate the main housing, the motor, the dustbin, the brush roll, the belt, the hose, and any other attachments.
• Study the manual: The manual will provide detailed diagrams and instructions for disassembling and reassembling your specific model.
• Take pictures: If you’re unsure about the order of reassembly, take pictures of the vacuum’s disassembled state.

Step 2: Start with the Base

Begin by attaching the base of the vacuum to the main housing. This usually involves aligning the base with the housing and securing it with screws.

• Ensure proper alignment: Make sure the base is properly aligned with the housing before tightening any screws.
• Use the appropriate screws: Use the correct length and type of screws for each attachment point.
• Tighten screws securely: Tighten the screws to secure the base to the housing, but avoid overtightening.

Step 3: Attach the Dustbin

The dustbin is typically attached to the main housing using clips or latches.

• Align the dustbin: Ensure the dustbin is properly aligned with the housing before attaching it.
• Secure the dustbin: Engage the clips or latches to secure the dustbin to the housing.
• Check for a secure fit: Gently pull on the dustbin to ensure it’s securely attached.

Step 4: Install the Brush Roll

The brush roll is usually located at the bottom of the vacuum and is responsible for picking up dirt and debris.

• Align the brush roll: Ensure the brush roll is properly aligned with the housing before attaching it.
• Attach the brush roll: Secure the brush roll to the housing using screws or clips.
• Check for proper function: Spin the brush roll by hand to ensure it’s rotating freely.

Step 5: Install the Belt

The belt connects the motor to the brush roll and is essential for the vacuum’s operation.

• Locate the belt’s position: Refer to the manual for the correct placement of the belt.
• Install the belt: Wrap the belt around the motor pulley and the brush roll pulley, ensuring it’s properly seated in the grooves.
• Check for proper tension: The belt should be taut but not overly tight. If the belt is too loose, it may slip; if it’s too tight, it may damage the motor or brush roll.

Step 6: Reattach the Hose

The hose is typically attached to the vacuum using a locking mechanism or a screw.

• Align the hose: Ensure the hose is properly aligned with the vacuum before attaching it.
• Attach the hose: Secure the hose to the vacuum using the locking mechanism or screw.
• Check for a secure fit: Gently pull on the hose to ensure it’s securely attached.

Step 7: Attach the Attachments

If your vacuum comes with attachments, such as a crevice tool or an upholstery tool, attach them to the hose or the vacuum’s main housing.

• Refer to the manual: The manual will provide instructions on how to attach each attachment.
• Securely attach the attachments: Ensure each attachment is securely fastened to prevent it from detaching during use.

Final Touches: Power Up and Test

Once you’ve reassembled your Bissell vacuum, it’s time to power it up and test its functionality.

• Plug in the vacuum: Connect the vacuum to a power outlet.
• Turn on the vacuum: Switch the vacuum on and check that it’s functioning properly.
• Test all features: Run the vacuum over a carpeted area to test the brush roll and suction. Use the attachments to test their functionality.

Troubleshooting Tips

If your Bissell vacuum isn‘t working properly after reassembly, try these troubleshooting tips:

• Check the belt: Ensure the belt is properly installed and has the correct tension.
• Check the brush roll: Make sure the brush roll is rotating freely and isn’t obstructed.
• Check the dustbin: Empty the dustbin and make sure it’s securely attached.
• Check the power cord: Ensure the power cord is plugged in and functioning properly.

Reassembly Success: A Clean and Efficient Vacuum

Congratulations! You’ve successfully reassembled your Bissell vacuum. Now you can enjoy a clean and efficient vacuum that’s ready to tackle any cleaning task. Remember to keep your vacuum clean and well-maintained to ensure its longevity.

What People Want to Know

Q: What if I’m missing a part?
A: If you’re missing a part, you can usually order a replacement part from the Bissell website or from a local appliance repair store.
Q: Can I use any type of screwdriver?
A: It’s best to use the type of screwdriver specified in your vacuum’s manual. Using the wrong screwdriver can damage the screws or the vacuum.
Q: How often should I clean my vacuum?
A: You should clean your vacuum regularly, depending on how often you use it. Check the manual for specific cleaning recommendations for your model.
Q: What if I can’t find my vacuum’s manual?
A: You can usually download a copy of your vacuum’s manual from the Bissell website.