Revolutionize Your Laundry Day: How to Get LG Washer to Just Drain Quickly and Easily!

Are you facing the frustrating issue of your LG washer not draining? It’s a common problem that can leave you with a soggy pile of laundry and a sense of helplessness. But don’t worry, you don’t need to call a repairman just yet. This guide will walk you through the most common reasons why your LG washer won’t drain and provide step-by-step solutions to get your machine back in working order.

Understanding the Drain System

Before diving into troubleshooting, let’s take a moment to understand how the drain system in your LG washer works. The drain pump is responsible for removing water from the tub after the wash cycle. This pump is connected to a drain hose that leads to your home’s plumbing system. Several factors can prevent this system from functioning properly, leading to a laundry nightmare.

1. Check the Drain Hose

The first and most common culprit is a clogged drain hose. Over time, lint, hair, and other debris can accumulate in the hose, restricting water flow. Here’s how to check and clean it:

• Locate the drain hose: It usually connects to the back of the washer and leads to a drain pipe or a standpipe.
• Disconnect the hose: Carefully disconnect the hose from the washer and the drain pipe.
• Inspect the hose: Look for any visible obstructions. If you see debris, use a long, thin object (like a wire hanger) to try and dislodge it.
• Clean the hose: You can also run water through the hose to flush out any remaining debris.
• Reconnect the hose: Once the hose is clean, reconnect it securely to the washer and drain pipe.

2. Inspect the Drain Pump Filter

Another common cause of a blocked drain is a clogged drain pump filter. This filter prevents larger items from entering the drain pump and causing damage. Here’s how to clean it:

• Locate the filter: It’s usually located on the front bottom panel of the washer. Check your owner’s manual for the exact location.
• Remove the filter: You may need to unscrew or pull a small panel to access it.
• Clean the filter: Remove any debris from the filter. You can rinse it with water to remove any remaining residue.
• Reinstall the filter: Put the filter back in place and ensure it’s securely fastened.

3. Check the Drain Pump

If the drain hose and filter are clear, the issue might be with the drain pump itself. The pump may be malfunctioning, preventing it from pushing water out of the washer. Here’s how to check it:

• Listen for pump sounds: Run a drain cycle and listen carefully for any unusual noises. A grinding or humming sound could indicate a failing pump.
• Test the pump manually (advanced): If you’re comfortable working with electrical components, you can disconnect the washer’s power and test the pump manually. This involves checking the pump’s wiring and applying a small voltage to see if it spins.

4. Look for Obstructions in the Drain

Sometimes, the problem lies outside of the washer itself. Check the drain line for any blockages. A kinked hose, a clog in the drain pipe, or even a build-up of lint in the standpipe can prevent water from draining properly.

5. Check the Control Board

If you’ve ruled out all the other possibilities, the problem might be with the control board. This board controls the washer’s functions, including the drain cycle. A malfunctioning control board can prevent the drain pump from activating. You’ll need a multimeter to test the control board, which is a more advanced troubleshooting step.

6. Troubleshooting Tips

• Check the water level: Ensure the water level is correct for the load size. Too much water can overload the drain pump.
• Use a drain cleaner: If you suspect a clog in the drain pipe, you can use a drain cleaner to remove any stubborn obstructions.
• Check the door latch: A faulty door latch can prevent the drain cycle from starting. Make sure the door is securely closed.
• Reset the washer: Sometimes, simply resetting the washer by unplugging it for a few minutes can resolve minor issues.

The Next Steps: When to Call a Professional

If you’ve tried all the troubleshooting steps and your LG washer still won’t drain, it’s time to call a professional appliance repair technician. They have the expertise and tools to diagnose and repair more complex issues like a faulty pump, control board problems, or a clogged drain line.

A New Lease on Life for Your LG Washer

By following these steps, you can troubleshoot and potentially fix the problem of your LG washer not draining. Remember, regular maintenance and cleaning can prevent future issues. Enjoy a clean and fresh laundry experience with a properly functioning washer!

Information You Need to Know

Q: Why is my LG washer making a loud noise when draining?
A: A loud noise during the drain cycle could indicate a problem with the drain pump. The pump might be worn out, have a loose impeller, or be clogged with debris. If the noise is persistent, it’s best to call a repair technician.
Q: Can I use a plunger to clear a clogged drain hose?
A: It’s not recommended to use a plunger on the drain hose as this can damage the hose or the washer’s internal components. Instead, try cleaning the hose with a long wire hanger or a drain snake.
Q: What are some signs of a faulty drain pump?
A: Signs of a faulty drain pump include:

• The washer won’t drain at all.
• The washer drains slowly.
• The drain pump makes unusual noises like grinding or humming.
• The washer leaks water during the drain cycle.

Q: How often should I clean my LG washer‘s drain pump filter?
A: It’s a good idea to clean the drain pump filter every 3-6 months to prevent clogs and ensure proper drainage. You can also check it more frequently if you notice any issues with draining.
Q: What can I do to prevent future drain problems?
A: Here are some tips to prevent drain problems:

• Clean the drain hose and filter regularly.
• Avoid overloading the washer.
• Don’t use excessive detergent.
• Ensure the drain hose is properly connected to the drain pipe.
• Don’t leave wet laundry in the washer for extended periods.